The `AWS::MediaConnect::Bridge` resource defines a connection between your data center’s gateway instances and the cloud.

For each bridge, you specify the type of bridge, transport protocol to use, and details for any outputs and failover.

CfnBridge

The name of the bridge.

This name can not be modified after the bridge is created.

name

The bridge placement Amazon Resource Number (ARN).

placementArn

The sources that you want to add to this bridge.

sources

An egress bridge is a cloud-to-ground bridge.

The content comes from an existing MediaConnect flow and is delivered to your premises.

egressGatewayBridge

An ingress bridge is a ground-to-cloud bridge.

The content originates at your premises and is delivered to the cloud.

ingressGatewayBridge

The outputs that you want to add to this bridge.

outputs

sourceFailoverConfig

CfnBridgeOutput

The Amazon Resource Name (ARN) of the bridge that you want to update.

bridgeArn

The network output name.

This name is used to reference the output and must be unique among outputs in this bridge.

The network output of the bridge.

A network output is delivered to your premises.

networkOutput

CfnBridgeSource

The name of the flow source.

This name is used to reference the source and must be unique among sources in this bridge.

flowSource

networkSource

The `AWS::MediaConnect::Flow` resource defines a connection between one or more video sources and one or more outputs.

For each flow, you specify the transport protocol to use, encryption information, and details for any outputs or entitlements that you want. AWS Elemental MediaConnect returns an ingest endpoint where you can send your live video as a single unicast stream. The service replicates and distributes the video to every output that you specify, whether inside or outside the AWS Cloud. You can also set up entitlements on a flow to allow other AWS accounts to access your content.

CfnFlow

The settings for the source that you want to use for the new flow.

source

The Availability Zone that you want to create the flow in.

These options are limited to the Availability Zones within the current AWS Region.

availabilityZone

encodingConfig

Determines the processing capacity and feature set of the flow.

Set this optional parameter to LARGE if you want to enable NDI outputs on the flow.

flowSize

The maintenance settings you want to use for the flow.

maintenance

The media streams that are associated with the flow.

After you associate a media stream with a source, you can also associate it with outputs on the flow.

mediaStreams

Specifies the configuration settings for NDI outputs.

Required when the flow includes NDI outputs.

ndiConfig

sourceMonitoringConfig

Key-value pairs that can be used to tag this flow.

vpcInterfaces

The `AWS::MediaConnect::FlowEntitlement` resource defines the permission that an AWS account grants to another AWS account to allow access to the content in a specific AWS Elemental MediaConnect flow.

The content originator grants an entitlement to a specific AWS account (the subscriber). When an entitlement is granted, the subscriber can create a flow using the originator's flow as the source. Each flow can have up to 50 entitlements.

CfnFlowEntitlement

A description of the entitlement.

This description appears only on the MediaConnect console and is not visible outside of the current AWS account.

description

The Amazon Resource Name (ARN) of the flow.

flowArn

The name of the entitlement.

This value must be unique within the current flow.

The AWS account IDs that you want to share your content with.

The receiving accounts (subscribers) will be allowed to create their own flows using your content as the source.

subscribers

The percentage of the entitlement data transfer fee that you want the subscriber to be responsible for.

dataTransferSubscriberFeePercent

encryption

An indication of whether the new entitlement should be enabled or disabled as soon as it is created.

If you don’t specify the entitlementStatus field in your request, MediaConnect sets it to ENABLED.

entitlementStatus

Key-value pairs that can be used to tag and organize this flow entitlement.

The `AWS::MediaConnect::FlowOutput` resource defines the destination address, protocol, and port that AWS Elemental MediaConnect sends the ingested video to.

Each flow can have up to 50 outputs. An output can have the same protocol or a different protocol from the source. The following protocols are supported: RIST, RTP, RTP-FEC, SRT-listener, SRT-caller, Zixi pull, and Zixi push. CDI and ST 2110 JPEG XS protocols are not currently supported by AWS CloudFormation.

CfnFlowOutput

The Amazon Resource Name (ARN) of the flow this output is attached to.

The range of IP addresses that should be allowed to initiate output requests to this flow.

These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

cidrAllowList

A description of the output.

This description appears only on the MediaConnect console and will not be seen by the end user.

The IP address where you want to send the output.

destination

The type of key used for the encryption.

If no `keyType` is provided, the service will use the default setting (static-key). Allowable encryption types: static-key.

The maximum latency in milliseconds.

This parameter applies only to RIST-based and Zixi-based streams.

maxLatency

The media streams that are associated with the output, and the parameters for those associations.

mediaStreamOutputConfigurations

The minimum latency in milliseconds for SRT-based streams.

In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.

minLatency

A suffix for the names of the NDI sources that the flow creates.

If a custom name isn't specified, MediaConnect uses the output name.

ndiProgramName

A quality setting for the NDI Speed HQ encoder.

ndiSpeedHqQuality

An indication of whether the output should transmit data or not.

outputStatus

The port to use when content is distributed to this output.

port

The protocol to use for the output.

> AWS Elemental MediaConnect no longer supports the Fujitsu QoS protocol. This reference is maintained for legacy purposes only.

protocol

remoteId

routerIntegrationState

routerIntegrationTransitEncryption

The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.

smoothingLatency

The stream ID that you want to use for this transport.

This parameter applies only to Zixi and SRT caller-based streams.

streamId

Key-value pairs that can be used to tag and organize this flow output.

The name of the VPC interface attachment to use for this output.

vpcInterfaceAttachment

The `AWS::MediaConnect::FlowSource` resource is usedt to add additional sources to an existing flow.

Adding an additional source requires Failover to be enabled. When you enable Failover, the additional source must use the same protocol as the existing source. A source is the external video content that includes configuration information (encryption and source type) and a network address. Each flow has at least one source. A standard source comes from a source other than another AWS Elemental MediaConnect flow, such as an on-premises encoder.

CfnFlowSource

A description for the source.

This value is not used or seen outside of the current MediaConnect account.

The Amazon Resource Name (ARN) of the flow this source is connected to.

The flow must have Failover enabled to add an additional source.

The type of encryption that is used on the content ingested from this source.

Allowable encryption types: static-key.

decryption

The ARN of the entitlement that allows you to subscribe to this flow.

The entitlement is set by the flow originator, and the ARN is generated as part of the originator's flow.

entitlementArn

gatewayBridgeSource

The port that the flow listens on for incoming content.

If the protocol of the source is Zixi, the port must be set to 2088.

ingestPort

The smoothing max bitrate (in bps) for RIST, RTP, and RTP-FEC streams.

maxBitrate

The protocol that the source uses to deliver the content to MediaConnect.

Adding additional sources to an existing flow requires Failover to be enabled. When you enable Failover, the additional source must use the same protocol as the existing source. Only the following protocols support failover: Zixi-push, RTP-FEC, RTP, RIST and SRT protocols.

If you use failover with SRT caller or listener, the `FailoverMode` property must be set to `FAILOVER` . The `FailoverMode` property is found in the `FailoverConfig` resource of the same flow ARN you used for the source's `FlowArn` property. SRT caller/listener does not support merge mode failover.

The port that the flow uses to send outbound requests to initiate connection with the sender.

senderControlPort

The IP address that the flow communicates with to initiate connection with the sender.

senderIpAddress

Source IP or domain name for SRT-caller protocol.

sourceListenerAddress

sourceListenerPort

Key-value pairs that can be used to tag and organize this flow source.

The name of the VPC interface to use for this source.

vpcInterfaceName

The range of IP addresses that should be allowed to contribute content to your source.

These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

whitelistCidr

The `AWS::MediaConnect::FlowVpcInterface` resource is a connection between your AWS Elemental MediaConnect flow and a virtual private cloud (VPC) that you created using the Amazon Virtual Private Cloud service.

To avoid streaming your content over the public internet, you can add up to two VPC interfaces to your flow and use those connections to transfer content between your VPC and MediaConnect.

You can update an existing flow to add a VPC interface. If you haven’t created the flow yet, you must create the flow with a temporary standard source by doing the following:

- Use CloudFormation to create a flow with a standard source that uses to the flow’s public IP address.
- Use CloudFormation to create a VPC interface to add to this flow. This can also be done as part of the previous step.
- After CloudFormation has created the flow and the VPC interface, update the source to point to the VPC interface that you created.

> The previous steps must be undone before the CloudFormation stack can be deleted. Because the source is manually updated in step 3, CloudFormation is not aware of this change. The source must be returned to a standard source before CloudFormation stack deletion. > When configuring NDI outputs for your flow, define the VPC interface as a nested attribute within the `AWS::MediaConnect::Flow` resource. Do not use the top-level `AWS::MediaConnect::FlowVpcInterface` resource type to specify NDI configurations.

CfnFlowVpcInterface

The name for the VPC interface.

This name must be unique within the flow.

The Amazon Resource Name (ARN) of the role that you created when you set up MediaConnect as a trusted service.

roleArn

A virtual firewall to control inbound and outbound traffic.

securityGroupIds

The subnet IDs that you want to use for your VPC interface.

A range of IP addresses in your VPC. When you create your VPC, you specify a range of IPv4 addresses for the VPC in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16. This is the primary CIDR block for your VPC. When you create a subnet for your VPC, you specify the CIDR block for the subnet, which is a subset of the VPC CIDR block. The subnets that you use across all VPC interfaces on the flow must be in the same Availability Zone as the flow.

subnetId

The `AWS::MediaConnect::Gateway` resource is used to create a new gateway.

AWS Elemental MediaConnect Gateway is a feature of MediaConnect that allows the deployment of on-premises resources for transporting live video to and from the AWS Cloud. MediaConnect Gateway allows you to contribute live video to the AWS Cloud from on-premises hardware, as well as distribute live video from the AWS Cloud to your local data center.

CfnGateway

The range of IP addresses that are allowed to contribute content or initiate output requests for flows communicating with this gateway.

These IP addresses should be in the form of a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

egressCidrBlocks

The name of the gateway.

This name can not be modified after the gateway is created.

networks

Represents a router input in AWS Elemental MediaConnect that is used to ingest content to be transmitted to router outputs.

CfnRouterInput

The configuration settings for a router input.

configuration

The maximum bitrate for the router input.

maximumBitrate

Indicates whether the router input is configured for Regional or global routing.

routingScope

tier

The Availability Zone of the router input.

The maintenance configuration settings applied to this router input.

maintenanceConfiguration

The AWS Region where the router input is located.

regionName

Key-value pairs that can be used to tag and organize this router input.

transitEncryption

Represents a router network interface in AWS Elemental MediaConnect that is used to define a network boundary for router resources.

CfnRouterNetworkInterface

The configuration settings for a router network interface.

The name of the router network interface.

The AWS Region where the router network interface is located.

Key-value pairs that can be used to tag and organize this router network interface.

Represents a router input in AWS Elemental MediaConnect that can be used to egress content transmitted from router inputs.

CfnRouterOutput

The configuration settings for a router output.

The maximum bitrate for the router output.

Indicates whether the router output is configured for Regional or global routing.

The Availability Zone of the router output.

The maintenance configuration settings applied to this router output.

The AWS Region where the router output is located.

Key-value pairs that can be used to tag and organize this router output.

AWS mediaconnect

L1 Constructs12